inPhoto ID PS / inPhoto Capture PS is very easy to install and run.
In order to be able to try inPhoto ID PS / inPhoto Capture PS make sure that you have the following items:
Suitable Canon Powershot camera:
Canon PowerShot ELPH 200 IS / IXUS 190
Canon PowerShot ELPH 185 / IXUS185
Canon PowerShot SX430 IS
Canon PowerShot ELPH 190 IS (IXUS 180).
Canon PowerShot ELPH180 (IXUS175)
Canon PowerShot SX420 IS
Canon PowerShot ELPH170 (IXUS170)
Canon PowerShot SX410 IS
Canon PowerShot SX520 HS
Canon PowerShot ELPH160 (IXUS160)
Canon PowerShot SX400 IS
Canon PowerShot G15
Canon PowerShot ELPH135 (IXUS145)
Canon Powershot SX170 IS
Canon Powershot SX510 HS
Canon Powershot SX500 IS
Canon Powershot SX160 IS
Canon Powershot SX150 IS
Canon Powershot SX130 IS
Canon Powershot S40 HS
Canon Powershot SX210 IS
Canon Powershot SX200 IS
Canon Powershot A1400
Canon Powershot A495
Canon Powershot A810
Canon Powershot A800
Canon Powershot A480
Canon Powershot A4000 IS
Canon Powershot A2200
SD memory card (from 64MB up to 32Gb). You can use for example SanDisk Standard Secure Digital Card or any other SD memory card available in all photo shops.
Personal computer
System requirements:
- Windows XP SP3, Windows Vista, Windows 7 (32 and 64bit), Windows 8, Windows 10
- Free 20MB on hard disk for the software files,
- Microsoft .NET Framework 3.5 Service Pack 1,
- One free USB 1.0 (or higher) port to connect Canon camera to PC,
- It is necessary to have the card reader connected to PC (or built-in).
Card reader connected to PC (or built-in). One of the recommended card readers is SanDisk ImageMate Multi-Card USB 2.0 Reader/Writer (SDDR-199-A20). The card reader will be used to program the camera SD card.
To install and run inPhoto ID PS the following simple operations shall be performed.
For inPhoto ID PS version 3 (old) and 4 (current):
1. DOWNLOAD inPhoto ID PS Setup file.
2. Insert SD memory card to your camera and capture a photo. Remove SD memory card from your camera.
3. Install SD memory card to the card reader connected to PC (or built-in), run inPhoto ID PS Setup and follow all its instructions.
4. inPhoto ID PS will be installed and SD camera memory card will be programmed. Once you installed inPhoto ID PS software on your computer, you can run it as TWAIN driver and have an ability of direct image capture from within Incardex and all other third party TWAIN compatible software. To be controlled with inPhoto ID PS Canon Powershot camera shall be used in Automatic (A) or Program (P) mode.
For inPhoto ID PS version 2 (old):
1. DOWNLOAD inPhoto ID PS and Card Preparation Utility for inPhoto ID PS.
Please contact info@akond.net to receive the download link.
2. Install SD memory card to the card reader connected to PC (or built-in), run Card preparation wizard and follow all its instructions.
3. Install inPhoto ID PS. Once you installed inPhoto ID PS software on your computer, you can run it as TWAIN driver and have an ability of direct image capture from within Incardex and all other third party TWAIN compatible software. To be controlled with inPhoto ID PS Canon Powershot camera shall be used in Automatic (A) or Program (P) mode.
More details on How to Start: inPhoto ID PS Start Up Guide... |